The purpose of this lab is to develop a circuit that uses idea of Thevenin to practice Thevenin Equivalent calculation. The circuit is formed by 2 voltage source 4 resistor and 1 load resistor. First we calculated the Rth=66 ohm and In=131mA and Vth=8.64V. Then we set up the simple Thevenin circuit to test our answer. The reading on multimeter is Rth=67.4, Vth=9.07. After that we put the load resistor into the circuit and run it. When load is 821 ohm, the voltage across the laod is 8.87 V. Then we set up the complex circuit and run it. Unluckily, our resistor cannot hold the current, and it started to burn out. Therefore, part 2 isn't doable.
没有评论:
发表评论